RC-Tanks & Accessories
RC BL System (Battle System)
Tamiya is proud to release Battle System-a revolution in tank-to-tank fighting. This system incorporates infrared light and realistic sound, eliminating the difficulty in judging, often found with other tank-to-tank games. Furthermore, infrared light is totally harmless and prevents damage to details of the tank body. The system is comprised of the GFS (Gun Fire Simulator) Unit and the Infrared LED Unit, for the respective detection and emission of infrared beams. A wide range of sound effects and actions are reproduced with Battle System including: damage blast, engine trouble sound, loss of speed, blast reaction, limited operation state, and finally inoperative state. Battle System provides a maximum shooting range of 30m and can be easily installed to your tank even after assembly and painting. Battle System lets you bring out the true roar of your 1/16 RC Tank!
Krick Max-Power 400 Electric Motor
Krick Max-Power 400 Electric Motor Electric motor size 385 SH - high power-cocurrent motor with 5-slot anchor. This motor can be installed with all Tamiya Tamiya Tank gears (except with the Leopard 2A6 - 56020). For assembling into the Tamiya gears you have to shorten the motor shaft a little bit. By using this motor the torque of the gears will raise and the speed of the tank will be reduced.
10,50 EUR
VAT incl. excl. Shipping costs
Manufacturer: Krick
Item No.: KR42116
Currently not available
Krick Max-Power 450 Electric Motor
Electric motor size 380 / 400 / 450 - high power-cocurrent motor with 5-slot anchor. This motor can be installed with all Tamiya Tamiya Tank gears (except with the Leopard 2A6 - 56020). For assembling into the Tamiya gears you have to shorten the motor shaft a little bit. By using this motor the torque of the gears will raise and the speed of the tank will be reduced.
11,50 EUR
VAT incl. excl. Shipping costs
Manufacturer: Krick
Item No.: KR42242
Currently not available
Accessories set for US Vehicles (jerrycans, boxes etc.) 1/16
With this set/sprue it is possible to built the following parts: 1 x jerrycan, 1x wooden box, 2x armor boxes 50 cal., 1x armor boxes 30 cal. and 2x US helmets.
5,50 EUR
VAT incl. excl. Shipping costs
Manufacturer: Tamiya
Item No.: 0225098
Currently not available
Little Chain, 35cm length, browned
Very fine small chain from Tamiya, browned. Original Tamiya spare part. 35cm length.
U.S. Cal. 30 Machine Gun Barrel - Brass turned - Browning M1919
Brass turned barrel for the US Cal. 30 Machine Gun M1919A4 with two part muzzle. The barrel is usable for the front Hull or Turret Coaxial Machine Gun of the M4 Sherman or M26 Pershing and other US Tanks. The barrel does not have a drill! It is not possible to use this barrel with an optical fibre!
8,50 EUR
VAT incl. excl. Shipping costs
Manufacturer: ABER
Item No.: AB16L-01
Currently not available
U.S. Cal .50 Browning M2 Machine Gun Barrel
Brass turned barrel for the US Cal. 50 Machine Gun Browning M2. The barrel is usable for the Turret Machine Gun of the M4 Sherman or M26 Pershing and other US Tanks or Tanks with .50 Cal Browning MG (like the Type 10).
40 cm universal fine chains set - two types - 1 pc. each
This set includes 2 chains in two different types, 1 piece each. Each chain is 40 cm long. Each link at Type A is 0,8 mm in Diameter and 1,5 mm long. Type B is 1,1 mm in Diameter and 2,0 mm long.
Twisted Rope - Khaki colored - ø1,1mm (Polyamide) - 2m
Twisted Rope ø1,1mm (Polyamide), Khaki dyed.
1,95 EUR
VAT incl. excl. Shipping costs
0,98 EUR per m
Manufacturer: SCHUMO-Kits
Item No.: ZUH09
In stock
Steelcable ø 1,5mm, 100cm length
Perfect for US vehicles like the Sherman, were thin cables are needed. This cable could be bend in any position and will not reverse. L ength: 100cm
1,95 EUR
VAT incl. excl. Shipping costs
Manufacturer: SCHUMO-Kits
Item No.: ZUH13
Currently not available
Brass Lifting Arm for Tamiya Elevation Unit
Brass made Lifting Arm for Tamiya Elevation Unit. New and reworked Version - see description.
Quality Fibre Optic, 1,5mm diameter, 10cm length
Quality Fibre Optic, 1,5mm diameter (equal to the Tamiya fibre optics diameter used with any Tamiya RC FO Tank) Fit perfectly for all front MG`s of all Tamiya RC Tanks. Piece of 10cm length!
2,94 EUR
VAT incl. excl. Shipping costs
Manufacturer: SCHUMO-Kits
Item No.: ZUH31
Currently not available
Replacement / Spare Set for Tamiya Gearbox (9415807)
This set includes all gears, spacers, bearings, shafts and screws for one Tamiya RC Tank Gearbox. The Drive shaft is matching for the Tamiya Shermans (56014 / 56032).
Improved Track Idler System for Tamiya M26 Pershing
The original Tamiya idler system is only adjustable in 3 positions, what is mostly not enough for a proper track adjustment.The Schumo-Kits idler system comes with a fine toothing which makes it possible, to adjust the track in any needed position.
19,95 EUR
VAT incl. excl. Shipping costs
Manufacturer: SCHUMO-Kits
Item No.: PH0010
Currently not available
Metal shock absorbers for M 26 Pershing
8 sets of metal shock absorbers in nickel silver. For replacing the original fragile kit parts A2 and A4.
49,94 EUR
VAT incl. excl. Shipping costs
Manufacturer: SCHUMO-Kits
Item No.: PH0012
Currently not available
Handle set for storage box M 26 Pershing
14 handles in nickel silver, for replacing the original kit parts E1.
Persicope Covers for M26 Pershing
Set includes 5 covers. Material: Nickel silvera
17,35 EUR
VAT incl. excl. Shipping costs
Manufacturer: SCHUMO-Kits
Item No.: PH0015
Currently not available
Turret Rain-/Dust Tarpaulin Mount for M26 Pershing
Mount for the rain-/dust tarpaulin on the turret and gun mantlet of the M26 Pershing, 1/16 For Tamiya and Heng Long Pershing useable.
40,00 EUR
VAT incl. excl. Shipping costs
Manufacturer: SCHUMO-Kits
Item No.: PH0017
Currently not available
Tamiya Ceramic Grease HG
This Cera-grease HG is made using Boron Nitride which gives it superior lubrication ability. Cera-grease can be used with MINI 4WD cars, R/C Cars, Robocraft gears and bearings, and provide excellent lubrication for plastic and metal parts. The 10g aluminum tube comes with its own nozzle for easy application.
8,50 EUR
VAT incl. excl. Shipping costs
85,00 EUR per 100g
Manufacturer: Tamiya
Item No.: 87099
In stock
